Junction Box

Junction Box JB-2/JB-4

This junction box is used to connect two or four strain gauge type transducers and average the outputs of those transducers. The mean value is easily measured by a digital indicator or data logger. 
It can also be used as a branching box to divide the connection of switching boxes into two or four series.

Junction Box JB-2/JB-4

  • Specifications
    Type JB-2/JB-4
    Number of input points JB-2 : 2
    JB-4 : 4
    Dimensions 80(W) x 50(H) x 120(D)mm
    Weight Approx. 220g

Examples of use

Example of use as an input averaging junction box

img-jb-2-4-02

・Strain gauge type transducers to be connected must be of the same capacity, rated output and input/output resistance
・The input/output resistance viewed from the instrument is as follows.
   (Input/output resistance of one transducer) divided by (Number of connected transducers).
   The calculated value above must be within the range of the instrument specification.

Example of use as a branching box

img-jb-2-4-03

As the inside of the junction box is wired with 7 wires (for terminals A to G), the junction box can also be used as a branching box as the above. Each connection between the data logger, junction box and switching boxes must be made using an exclusive 7-core cable specified by us.

Product