PMFLS series Asphalt Mold strain gauge
These mold strain gauges are embedded in asphalt for use in such applications as loading tests with rolling compaction. Material used in the backing is super engineering plastic featuring water and heat resistance. The gauges can withstand a high temperature of up to 200℃ during placing of asphalt.
Gauges are temperature-compensated for asphalt.
| Applicable specimen | Asphalt |
|---|---|
| Operational temperature | -20 to +60℃ |
| Temperature compensation range | - |
| Bonding adhesive | Embedment |
| Backing | Super engineering plastics |
| Element | Cu-Ni alloy |
| Strain limit | - |
| Fatigue life at room temperature | - |
-
Single-element (G.F. 2.1 approx.)
Φ 6 mm 0.35 mm2 4-core shielded chloroprene cable 2 m
Total resistance per meter : 0.11 Ω
3-wire system
Type Gauge
length
(mm)Gauge
width
(mm)Backing
length
a (mm)Backing
width
b (mm)Backing
thickness
c (mm)Gauge
center
d (mm)Resistance
(Ω)PMFLS-60-50-2LTSC 60 1 120 13 Approx. 7 60 120
More Information
