Carrier type Dynamic Strainmeter DA-17A
The DA-17A is a carrier wave type dynamic strainmeter with frequency response of 2.5 kHz. One unit is for one measurement channel, and two or more units can be installed in an exclusive case or rack to make a multi-channel system.
By installing the units in the exclusive carrying case for computer control, control from a PC via LAN is possible such as setting of sensitivity and low pass filter, operation of balancing and calibration, and acquisition of setting and monitor values.
- Features
- Frequency response of DC to 2.5 kHz
- Digital monitor of output voltage, with indication of maximum / minimum value and open / over
- Electronic automatic balancing
- Isolation between input and output
- Automatic tracking capacity balancing
- Peak hold function privided
- Dual output
- Built-in low-pass filter
- Insulation resistance check function for strain gauge bridge
- External control possible for balancing and calibration signal output
- Dual power supply of AC and DC
- Possible control by PC (when installed in exclusive case)
-
Specifications
Type DA-17A Measuring object Strain Number of channels 1 channel Measuring range ±50000 x 10-6 strain
Frequency response DC to 2.5 kHz External dimensions 40(W) x 140(H) x 266(D) mm Weight Approx. 870 g Power supply AC 90 to 132 V 50 / 60 Hz 7.5 VA MAX. (AC100 V)
DC 10 to 30 V 0.25 A MAX. (DC12 V)
More Information
