• Home
  • Node
  • Datamail Management Software TDS-Mail

Datamail Management Software TDS-Mail

This software transmits measurement data from static strainmeters (T-ZACCS3 TS-360, TDS-150, TC-32K, TC-31K, MD-111, TC-35N) using interval timers, etc. via e-mail (data mail) using a data mail converter. This software receives it and performs recording and alarm monitoring. Remote monitoring is easily achieved without the need to build a large server system. 

Features
  • Telemetry system with low running costs 
  • Supports 5 target locations (measuring instruments) 
  • Data acquisition is possible at multiple locations as long as an e-mail receiving environment is available 
  • No need to manage servers, which are difficult to maintain 
  • Sends alarm e-mails and data absence e-mails 
  • Optional functions include rainfall measurement, quadrature calculation, multistage inclinometer, and horizontal displacement measurement 

  • System Configuration

    OS / PC / communication environment / protection key
    OS Microsoft Windows 7(SP1)/8.1/10/11
    PC CPU and CD drive recommended by the above OS environment and dual core or higher 
    HDD space: The above OS environment recommends the following disk space and the following space is required for setup. 
    • This software: 12 MB of available space or more 
    • Microsoft .NET Framework 4.8 : 4.5 GB 
    This software requires “Microsoft .NET Framework 4.8” 
    communication environment Internet connection environmentEmail can be sent and received
    Protection key USB Dongle

Application image

TDS-Mail automatically converts measurement data from measuring instruments installed at various measuring points into e-mails and transmits them.
TDS-Mail data mail management software extracts and records measurement data from the received mail and monitors alarms. 

img-tdsmail-01

*“FOMA”, the 3rd generation mobile communication system, will terminate its service on 2026/3/31. 
Please be careful if you are using FOMA network compatible model FPT-Em/DMA-S/DMA-ES. 

Option

Inclinometer and rainfall option version TDS-Mail-F

  • Rainfall Measurement

Rainfall measurement is made possible by counting the contact pulse signal from the tipping rain gauge using the NSW-01C network module or the built-in contact input of the MD-111 monitoring system controller. 

The total rainfall, hourly rainfall, and 24-hour rainfall are calculated from the rainfall counts. 

  • Quadrature Calculation

Four-Way Calculation Using Measurement Channel Data

  • Multi-stage inclinometer - horizontal displacement measurement

Extended data can be created for each borehole and horizontal displacement distribution graphs can be displayed

More Information