Monitoring measurement software Visual LOG Light TDS-700L
Visual LOG® Light is software for Windows for controlling measurement, monitor alarms, etc. using any of our digital static strainmeters.
With its interface and configuration of measurement instruments, this software accommodates direct computer connection by RS-232C / GP-IB / LAN / USB and data memory forwarding, and is optimally designed for each, such that its rich assortment of alarm and monitor functions can still be used immediately on the spot with extreme ease-of-use and a high level of stability.
| Type | Applicable measuring instruments | Overview |
|---|---|---|
| Visual LOG Light TDS-700L |
TS-560 TS-360 TDS-540(Ver.1.0C or later) TDS-530(Ver.1.0C or later) TDS-150 TDS-302(Ver.1.2A or later) TDS-303 TDS-300 TDS-102(Ver.1.2E or later) TC-32K[single/multi] TC-31K[multi] TC-35N |
Data logger setting, measurement RS-232C/GP-IB/USB/LAN |
-
System configuration
OS / computer / interface
• Computer
OS Microsoft Windows 7(SP1)/8.1/10/11 Computer Any model on which the above OSes can operate, CD drive Interface LAN: 100BASE-TX or better
USB: USB 2.0• Printer
All printers supported by MS-Windows
• GP-IB boar
National Instruments GP-IB board
AT and PC/AT compatibles: AT-GPIB/TNT, AT-GPIB/TNT(PnP), PCMCIA-GPIB*2
NEC PC98 : NEC-GPIB/TNT、NEC-GPIB/TNT(PnP)、PCMCIA-GPIB*2
*1: Windows and MS-Excel are registered trademarks of Microsoft in the US.
*2: If using PCMCIA-GPIB, computer is required to have a PC card slot.
Also check that the PC card service (Windows) is set up.
More Information
