Gauge protector
This rubber protector is designed to protect gauges which are bonded onto metal surface from the environment for long-term measurement. The strain gauge is packed inside together with the applied adhesive and overcoating materials. The protector is also provided with a hole for cable intake. It allows the entire area to be isolated from ambient conditions which may affect reliable measurement, and further increases the coating performance.
![Gauge Protector](/sites/default/files/2019-01/protecter%20Gauge-stack.jpg)
![gauge_protector](/sites/default/files/inline-images/gauge_protector_e.png)
After completing the 1st and 2nd overcoating layers, epoxy resin is injected to provide mechanical protection.
Dimensions (mm) |
Frame Φ100 (InnerΦ92) x 15 (Height) Cover Φ100 x 3 (Thick) |
---|---|
Operational temperature range (℃) |
-20 to +80 |
Extension cable |
Φ9mm cable recommendable |
Strain gauges with a large-size backing, such as the PFL-30-11 ane PL-60-11, cannot be used with the Gauge Protector.
More Information