Multi-layer inclinometer KB-JG/KB-KG ±5° to ±10°
This is the inclinometer for automatic measurement of ground and structure displacement.
A dedicated guide tube is installed in the ground or structure in advance, and multiple inclinometers are connected and fixed in the guide tube with relay rods (KBF-JG33/KBF-KG33) so that they are at the measurement position.
Automatic measurement can be carried out using the data logger TDS/TS series.
Graphic display of displacement is also possible.
Used for measuring landslide displacement and earth retaining wall displacement.
The KB-JG and KB-KG models are available according to the number of measurement axes. The KB-JG model can only measure in one direction, while the KB-KG model can measure in both X and Y directions simultaneously. Built-in arresters can also be manufactured.
Protection rating: IP68 equivalent
- Features
- Made of all stainless steel for excellent corrosion resistance
- Excellent reliability
- Easy automatic measurement
- Up to 15 steps can be measured
- Model KB-KG can measure in X- and Y-direction with a single unit
-
Specifications
Type No. of measuring axis Capacity Rated output Non-linearity Temperature range KB-5JG 1 direction ±5° Approx. 1mV/V
（2000x10-6 strain）
0.5％RO －20 to ＋60℃ KB-10JG ±10° KB-5KG 2 directions ±5° KB-10KG ±10° Output polarity
The measured value moves in the direction of the arrow on the label on the body of the unit in relation to the change in inclination.
More Information
