KLA-A Settlement Transducer
NKLA-B TML-NET type Settlement Transducer 100 mm to 200 mm

This is a settlement gauge that is set on a ground surface to measure the settlement of each ground layer. Special anchors are placed at target positions in a borehole, and the displacement between the anchors and the ground surface is measured. Measurement can be made at a maximum of six levels in one borehole.
* For information on network-capable NKLA-B, see special measurement systems.

 

Protection ratings : IP 45 equivalent

 

KLA-A Settlement Transducer / NKLA-B TML-NET type Settlement Transducer
Features
  • Remote measurement
  • Measures the amount of settlement at the maximum 6 positions.
  • Specifications

    Type No. of measurement Capacity Rated output Non-linearity Temperature range
    KLA-100A-○ 1 to 6 100 mm Approx. 2.5 mV/V
    (5000 x 10-6 strain)
    1 %RO -20 to +60 ℃
    (no incing)
    KLA-200A-○ 200 mm
    Type No. of measurement Capacity Rated indication Non-linearity Temperature range
    NKLA-100B-○ 1 to 6 100 mm Approx. 5000 digit 1 %RO -20 to +60 ℃
    (no incing)
    NKLA-200B-○ 200 mm

    * “◯” under “Type” corresponds to the number of measurements, 1 to 6.

    Output polarity

    img-trout-14

    Measurement moves in the plus direction with regard to an increase in settlement.