Network measuring systemTML-NET FAQ

Is this network type usable in a LAN or telephone network?

You cannot connect directly. Send data from a data logger via LAN or modem.
Can you use it in combination with a data logger?

Use the network driver NDR-100 to mix with a switching box.
Is connection work a hassle compared with a switching box that can connect 50 points per unit?

When the measurement points are far apart, sensors for network modules can be wired in a star-type cascade connection, so wiring distance is shorter than with centralized wiring to the switchbox, making it easier to wire.
Can you use power-saving modules and conventional NSW-011B and NSW-014B as they are?

They can be mixed. However, the number of measured points and extension distances are by B-type specifications for NSW-011B and NSW-014B.
Can you install it outdoors and use it for long-term measurement? Is there a protective cover?

For outdoor use, long-term measurement is possible using a storage case so it is not exposed to rain, etc.
It gives “dedicated 2-conductor shielded cable”. Can other cables be used for extension?

Other multi-conductor cables are not recommended because they may affect the transmission signal.
Can you extend the cable between networked inclinometers?

Extension to each hole is possible by using a dedicated cable.