TC-32K FAQ

  • How long can you connect a CSW-5B to a TC-32 K and measure with 1-hour sleep intervals?

    Measurement is possible up to about 2400 hours (100 days) using a battery in a normal temperature environment.

  • How long can it be used with a battery?

    It can be used continuously for 10 hours. With a 1-hour sleep interval, for 116 days.

  • Even if the unit is set to kN, με is displayed on the monitor.

    If set to Simple Measure, the unit setting is not reflected. Cancel Simple Measure mode.

  • I want to monitor TC-32 K measured values on a computer. Is there any such software?

    You can use Visual Log Light TDS-700L.

  • I am going to measure with a connected load cell. How do you set the parameters?

    Set the coefficient, display digits, and unit. The coefficient can also be set by entering the rated capacity, rated output, etc. from the Cap/RO setting by referring to the test data included with the load cell.

  • Can the 1-gauge 4-wire method be used without an adapter?

    Connect wires (with no connector plug) to the input terminal to allow it to be used with the TC-32K or one of our switching boxes.

  • How can I view the data recorded on a CF card on a computer?

    Insert it in a computer using a commercially available card reader to read it. The data can also be viewed on the TC-32K.

  • How does the display appear when a thermocouple is not connected after setting it to thermocouple mode?

    When entry is open, by default no set values are displayed.
    Select measurement setting options from the menu, then set burnout check to on in the next screen, and the display will show "********" when a thermocouple is not connected.

  • The CF card is not recognized.

    Check the format of the CF card. Only FAT16 is supported with TC-32K.

  • I’m recording data to data memory and CF card. What happens when the data memory is full?

    If the ring buffer is set to "Off", no more data will be recorded in the data memory. If "On", old data is discarded as new data continues to be recorded.
    Data continues recording on a CF card. One file can store 65000 items of data, and new files are automatically created.

  • Can you measure multiple points using TC-32K?

    Using the dedicated switching box CSW-5B allows five points to be measured automatically.
    Up to 10 switching boxes can be managed by connecting and measuring multiple switching boxes.