Strain Gauge Adhesives EB-2 adhesives(Long-term measurement)

EB-2 adhesives(Long-term measurement)

Two-component room-temperature-curing epoxy adhesive for bonding strain gauges for use in temperatures from -60°C to +150°C. Enables stable measurement for a long period of time. Mix the necessary quantity of drugs A and B at the weight ratio of 10 to 3.

EB-2 接着剤（長期測定）

  • Specifications
    TYPE EB-2
    Two component Room-temperature-curing
    (Mixing ratio: 10:3)
    Contents A:10 g x 3
    B:3 g x 3
    Component Epoxy
    Applicable specimen Metal, Composite
    Operating temperature -60 to +200 ℃
    Curing temperature and time Room temperature 1 day
    Pressure 50 to 200kPa
    Shelf life 3 months

More Information

Strain Gauge Adhesives EA-2A adhesives(Cryogenic temperature)

EA-2A adhesives(Cryogenic temperature)

Two-component room-temperature-curing epoxy adhesive for bonding CF series strain gauges for use in temperature from cryogenic ( - 269 ℃) up to 50 ℃. Mix the necessary quantity of drugs A and B at the weight ratio of 2 to 1.

EA-2A adhesives(Cryogenic temperature)

  • Specifications
    TYPE EA-2A
    Two component Room-temperature or heat curing
    (Mixing ratio: 2:1)
    Contents A:25 g *
    B:15 g *
    Component Epoxy
    Applicable specimen Metal, Concrete, Composite
    Operating temperature -269 to +50 ℃
    Curing temperature and time Pressure at 50 to 300kPa,
    Room temperature 1 day or at 50 ℃ 2 hrs.
    Shelf life 3 months

    * These contents are for outside Japan.

More Information

Strain Gauge Adhesives C-1 adhesives(Long-term measurement, Transducer-specific)

C-1 adhesives(Long-term measurement, Transducer-specific)

Single-component heat-curing type adhesive. For use on strain gauges that are suited to heat curing. Enables reliable measurement for long periods and in high temperature up to 200°C.

C-1 adhesives(Long-term measurement, Transducer-specific)

  • Specifications
    TYPE C-1
    Single component Heat-curing
    Contents Single 25 g *
    Component Phenol
    Applicable specimen Metal
    Operating temperature -269 to +200 ℃
    Curing temperature and time Pre-curing at 130 ℃, 1hr. pressure 200 to 300kPa.
    Post-curing at 200 ℃ 1hr. without pressure.
    Shelf life 3 months

    * These contents are for outside Japan.

More Information

Strain Gauge Adhesives NP-50B adhesives(High temperature)

NP-50B adhesives(High temperature)

Two-component room-temperature-curing polyester adhesive for bonding QF, ZF and BF series strain gauges. Put the necessary quantity of drug A into the supplied mixing vessel then add drug B by drops to total 3~4% by weight of drug A. Use the mixed adhesive within 5~20 minutes.

NP-50B adhesives(High temperature)

  • Specifications
    TYPE NP-50B
    Two component Room-temperature-curing
    (Mixing ratio: 2 to 3%)
    Contents A:25 g *
    B:3 g *
    Component Polyester
    Applicable specimen Metal, Composite
    Operating temperature -30 to +300 ℃
    Curing temperature and time Room temperature
    Pressure 50 to 300kPa
    16 hrs.
    Shelf life 6 months

    * These contents are for outside Japan.

More Information

Strain Gauge Adhesives PS adhesives(Concrete,Mortar,Wood)

PS adhesives(Concrete,Mortar,Wood)

Two-component room-temperature-curing polyester adhesive. Used as a surface precoating agent for bonding P and PF series gauges to concrete and also as an adhesive for WFLM series gauges. The special filler contained exhibits alkali resistance and effectively shuts off moisture and gas from inside of the concrete. Its high viscosity enables use on vertical walls or ceilings. Put the necessary quantity of drug A in the supplied mixing vessel, then add drug B by drops to total 2~4% by weight of drug A.

PS adhesives(Concrete,Mortar,Wood)

  • Specifications
    TYPE PS
    Two component Room-temperature-curing
    (Mixing ratio: 2 to 4%)
    Contents A:25 g *
    B:3 g *
    Component Polyester
    Applicable specimen Concrete, Mortar, Wood
    Operating temperature -30 to +100℃
    Curing temperature and time Room temperature
    2 to 3 hrs.
    Shelf life 3 months

    * These contents are for outside Japan.

More Information

Strain Gauge Adhesives RP-2 adhesives(Concrete, Mortar)

RP-2 adhesives(Concrete, Mortar)

Two-component room-temperature-curing polyester adhesive for bonding PF and P series strain gauges. The mixing procedure is the same as above for P-2 adhesive. Put the necessary quantity of drug A in the supplied mixing vessel, then add drug B by drops to total 2~4% by weight of drug A. Use the mixed adhesive within 10~20 minutes.

RP2-bond

  • Specifications
    TYPE RP-2
    Two component Room-temperature-curing
    (Mixing ratio: 2 to 4%)
    Contents A:25 g *
    B:3 g *
    Component Polyester
    Applicable specimen Concrete, Mortar
    Operating temperature -30 to +180 ℃
    Curing temperature and time Room temperature
    Pressure 50 to 300kPa
    2 to 3 hrs.
    Shelf life 3 months

    * These contents are for outside Japan.

More Information

Strain Gauge Adhesives P-2 adhesives(General purpose)

P-2 adhesives(General purpose)

Two-component room-temperature-curing polyester adhesive for bonding PF, P and F series strain gauges. Put the necessary quantity of drug A in the supplied mixing vessel, then add drug B by drops to total 2~6% by weight of drug A. Use the mixed adhesive within 5~15 minutes.

P-2 adhesives

  • Specifications
    TYPE P-2
    Two component Room-temperature-curing
    (Mixing ratio: 1 to 3%)
    Contents A:25 g *
    B:3 g *
    Component Polyester
    Applicable specimen Metal
    Operating temperature -30 to +180 ℃
    Curing temperature and time Room temperature
    Pressure 50 to 300kPa
    2 to 3 hrs.
    Shelf life 6 months

    * These contents are for outside Japan.

More Information