Strain Gauge Adhesives A-2 adhesives(Bolt embedding)

A-2 adhesives(Bolt embedding)

Two-component heat-curing epoxy adhesive for bonding BTM strain gauges. Mix the necessary quantity of drugs A and B at the weight ratio of 10 to 1, then pour the mixed adhesive into a hole drilled of the bolt in which the gauge is inserted. Keep at room temperature for 12 hours, then cure at 140°C in furnace for 3 hours.

A-2 adhesives(Bolt embedding)

  • Specifications
    TYPE A-2
    Two component Heat curing
    (Mixing ratio: 10:1)
    Contents A:25 g *
    B:5 g *
    Component Epoxy
    Applicable specimen Bolt
    Operating temperature -30 to +100 ℃
    Curing temperature and time Room temperature 12 hrs.
    and 140 ℃ 3 hrs.
    Shelf life 3 months

    * These contents are for outside Japan.

More Information

Strain Gauge Adhesives EB-2 adhesives(Long-term measurement)

EB-2 adhesives(Long-term measurement)

Two-component room-temperature-curing epoxy adhesive for bonding strain gauges for use in temperatures from -60°C to +150°C. Enables stable measurement for a long period of time. Mix the necessary quantity of drugs A and B at the weight ratio of 10 to 3.

EB-2 接着剤（長期測定）

  • Specifications
    TYPE EB-2
    Two component Room-temperature-curing
    (Mixing ratio: 10:3)
    Contents A:10 g x 3
    B:3 g x 3
    Component Epoxy
    Applicable specimen Metal, Composite
    Operating temperature -60 to +200 ℃
    Curing temperature and time Room temperature 1 day
    Pressure 50 to 200kPa
    Shelf life 3 months

More Information

Strain Gauge Adhesives EA-2A adhesives(Cryogenic temperature)

EA-2A adhesives(Cryogenic temperature)

Two-component room-temperature-curing epoxy adhesive for bonding CF series strain gauges for use in temperature from cryogenic ( - 269 ℃) up to 50 ℃. Mix the necessary quantity of drugs A and B at the weight ratio of 2 to 1.

EA-2A adhesives(Cryogenic temperature)

  • Specifications
    TYPE EA-2A
    Two component Room-temperature or heat curing
    (Mixing ratio: 2:1)
    Contents A:25 g *
    B:15 g *
    Component Epoxy
    Applicable specimen Metal, Concrete, Composite
    Operating temperature -269 to +50 ℃
    Curing temperature and time Pressure at 50 to 300kPa,
    Room temperature 1 day or at 50 ℃ 2 hrs.
    Shelf life 3 months

    * These contents are for outside Japan.

More Information

Strain Gauge Adhesives C-1 adhesives(Long-term measurement, Transducer-specific)

C-1 adhesives(Long-term measurement, Transducer-specific)

Single-component heat-curing type adhesive. For use on strain gauges that are suited to heat curing. Enables reliable measurement for long periods and in high temperature up to 200°C.

C-1 adhesives(Long-term measurement, Transducer-specific)

  • Specifications
    TYPE C-1
    Single component Heat-curing
    Contents Single 25 g *
    Component Phenol
    Applicable specimen Metal
    Operating temperature -269 to +200 ℃
    Curing temperature and time Pre-curing at 130 ℃, 1hr. pressure 200 to 300kPa.
    Post-curing at 200 ℃ 1hr. without pressure.
    Shelf life 3 months

    * These contents are for outside Japan.

More Information

Strain Gauge Adhesives NP-50B adhesives(High temperature)

NP-50B adhesives(High temperature)

Two-component room-temperature-curing polyester adhesive for bonding QF, ZF and BF series strain gauges. Put the necessary quantity of drug A into the supplied mixing vessel then add drug B by drops to total 3~4% by weight of drug A. Use the mixed adhesive within 5~20 minutes.

NP-50B adhesives(High temperature)

  • Specifications
    TYPE NP-50B
    Two component Room-temperature-curing
    (Mixing ratio: 2 to 3%)
    Contents A:25 g *
    B:3 g *
    Component Polyester
    Applicable specimen Metal, Composite
    Operating temperature -30 to +300 ℃
    Curing temperature and time Room temperature
    Pressure 50 to 300kPa
    16 hrs.
    Shelf life 6 months

    * These contents are for outside Japan.

More Information