Multi-Recorder Measurement Unit(TMR-300 Series) Thermocouple/Voltage Unit TMR-332
Thermocouple / Voltage Unit TMR-332
This unit is for measurement of temperature with thermocouple T, K or J, and also for measurement of DC voltage within ±20 V. Since the terminal blocks for connection are detachable from the unit main body, connection works can be made easily.
-
Specifications
Type TMR-332 Number of measuring points 8 channels Input Thermocouple (T, K, J), Voltage, Isolated between channels Measuring range T: -200 to +400 ℃
K: -200 to +300 ℃
J: -200 to +200 ℃
DC voltage: ±20 VExternal dimensions 200(W) x 25(H) x 100(D) mm Weight Approx. 550 g Power supply DC 10 V to 30 V 0.25 A MAX (12 V) (supplied from TMR-311)
More Information
Multi-Recorder Measurement Unit(TMR-300 Series) Voltage Input Unit TMR-331
Voltage Input Unit TMR-331
This unit is for measurement of DC voltage within the range of ±52 V.
-
Specifications
Type TMR-331 Number of measuring points 8 channels Input Single end (unbalanced)
Isolated between channelsSettable range ±52 V, ±20 V, ±10 V, ±5 V, ±1 V External dimensions 200(W) x 25(H) x 100(D) mm (excluding projected parts) Weight Approx. 550 g (including rubber protectors) Power supply DC 10 V to 30 V 0.25 A at maximum (12 V) (supplied from TMR-311)
More Information
Multi-Recorder Measurement Unit(TMR-300 Series) Carrier type strain unit TMR-323
Carrier type strain unit TMR-323
This unit is for measurement of strain in full bridge connection with carrier wave bridge excitation, which is resistant to noise. It is the most suitable for the measurement on site where induction noise or commercial power noise is expected.
-
Specifications
Type TMR-323 Number of measuring points 8 channels Input Strain Applicable gauge resistance 120 to 350 Ω Bridge excitation 0.5 Vrms, 2 Vrms, 5 kHz Measuring range ±20000×10-6 strain (bridge excitation 2 Vrms)
±80000×10-6 strain (bridge excitation 0.5 Vrms)External dimensions 200(W) x 25(H) x 100(D) mm (excluding projected parts) Weight Approx. 660 g (including rubber protectors) Power supply DC 10 V to 30 V 0.3 A at maximum (12 V) (supplied from TMR-311)
More Information
Multi-Recorder Measurement Unit(TMR-300 Series) Strain 1G2G4G unit TMR-322
Strain 1G2G4G unit TMR-322
This unit is for measurement of strain. Using the supplied detachable bridge box (SB-120T or SB-350T; selected when ordering) or terminal block, measurement in quarter bridge 3-wire, half bridge and full bridge connection is possible.
-
Specifications
Type TMR-322 Number of measuring points 8 channels Input Strain Applicable gauge resistance 120 to 1000 Ω Bridge excitation DC 0.5 V, 2 V Measuring range ±20000 x 10-6 strain (bridge excitation 2 V)
±80000 x 10-6 strain (bridge excitation 0.5 V)External dimensions 200(W) x 25(H) x 100(D) mm (excluding projected parts) Weight Approx. 550 g (including rubber protectors) Power supply DC 10 V to 30 V 0.2 A at maximum (12 V) (supplied from TMR-311)
More Information
Multi-Recorder Measurement Unit(TMR-300 Series) Strain Full Bridge Unit TMR-321
Strain Full Bridge Unit TMR-321
This unit is for measurement of strain in full bridge connection. Measurement of DC voltage is also possible by using optional attenuator cable (CR-4010).
-
Specifications
Type TMR-321 Number of measuring points 8 channels Input Strain, Voltage (when using optional cable CR-4010) Applicable gauge resistance 120 to 1000 Ω Bridge excitation DC 0.5 V, 2 V Measuring range ±20000 x 10-6 strain (bridge excitation 2 V)
±80000 x 10-6 strain (bridge excitation 0.5 V)External dimensions 200(W) x 25(H) x 100(D) mm (excluding projected parts) Weight Approx. 550 g (including rubber protectors) Power supply DC 10 V to 30 V 0.2 A at maximum (12 V) (supplied from TMR-311)
More Information
Multi-Recorder Measurement Unit(TMR-300 Series)
Dynamic Strainmeters Analog type Carrier type Dynamic Strainmeter DA-38A
Carrier type Dynamic Strainmeter DA-38A
The DA-38A is a carrier wave type dynamic strainmeter with high frequency response of 10 kHz. It features easy operation and excellent noise resistivity. Digital sensitivity setting method is adopted to enable easy and accurate setting. Also provided is digital display function of measurement value for reliable dynamic measurement. One unit is for one measurement channel, and two or more units can be installed in an exclusive case or rack to make a multi-channel system.
- Features
- Frequency response of DC to10 kHz
- Carrier wave bridge excitation provides excellent resistivity to noise
- Always checks disconnection of strain gauges and cable
- Two output monitors provided; Digital display and level meter
- Lower power consumption compared to conventional models
- Automatic tracking capacity balancing
- Reading and automatic setting of TEDS transducer
- Dual output
- Built-in low-pass filter
- Possible external control for balancing and calibration signal output
-
Specifications
Type DA-38A Measuring object Strain Number of channels 1 channel Measuring range ±50000 x 10-6 strain
Frequency response DC to 10 kHz External dimensions 40(W) x 140(H) x 266(D) mm Weight Approx. 750 g Power supply AC 90 to 264 V 50 / 60 Hz 8.5 VA MAX. (AC100 V)
DC 10 to 30 V 0.27 A MAX. (DC12 V)
More Information
Dynamic Strainmeters Analog type Carrier type Dynamic Strainmeter DA-18A
Carrier type Dynamic Strainmeter DA-18A
The DA-18A is a carrier wave type dynamic strainmeter featuring easy operation and excellent noise resistivity. Digital sensitivity setting method is adopted to enable easy and accurate setting. Also provided is digital display function of measurement value for reliable dynamic measurement. One unit is for one measurement channel, and two or more units can be installed in an exclusive case or rack to make a multi-channel system.
- Features
- Frequency response of DC to 2.5 kHz
- Carrier wave bridge excitation provides excellent resistivity to noise
- Equipped with two output monitors; Digital display and level meter
- Lower power consumption compared to conventional models
- Automatic tracking capacity balancing
- Reading and automatic setting of TEDS transducer
- Dual output
- Built-in low-pass filter
- External control possible for balancing and calibration signal output
-
Specifications
Type DA-18A Measuring object Strain Number of channels 1 channel Measuring range ±50000×10-6 strain
Frequency response DC to 2.5 kHz External dimensions 40(W) x 140(H) x 266(D) mm Weight 870 g Power supply AC 90 to 110 V or 198 to 242 V 50 / 60 Hz 6 VA MAX. (AC100 V)
DC 10 to 30 V 0.25 A MAX. (DC12 V)
More Information
Dynamic Strainmeters Analog type Carrier type Dynamic Strainmeter DA-37A
Carrier type Dynamic Strainmeter DA-37A
The DA-37A is a carrier wave type dynamic strainmeter with high frequency response of 10 kHz. One unit is for one measurement channel, and two or more units can be installed in an exclusive case or rack to make a multi-channel system.
By installing the units in the exclusive carrying case for computer control, control from a PC via LAN is possible such as settings of sensitivity and low pass filter, operation of balancing and calibration, and acquisition of setting and monitor values.
- Features
- High frequency response of DC to 10 kHz
- Digital monitor of output voltage, with indication of maximum / minimum value and open / over
- Electronic automatic balancing
- Isolation between input and output
- Automatic tracking capacity balancing
- Dual output
- Built-in low-pass filter
- Insulation resistance check function for strain gauge bridge
- External control possible for balancing and calibration signal output
- Dual power supply of AC and DC
- Possible control by PC (when installed in exclusive case)
-
Specifications
Type DA-37A Measuring object Strain Number of channels 1 channel Measuring range ±50000×10-6 strain
Frequency response DC to 10 kHz External dimensions 40(W) x 140(H) x 266(D) mm Weight Approx. 750 g Power supply AC 90 to 132 V 50 / 60 Hz 9.2 VA MAX. (AC100 V)
DC 10 to 30 V 0.35 A MAX. (DC12 V)
More Information
