Dynamic Strainmeters Analog type

Carrier type Dynamic Strainmeter DA-17A

The DA-17A is a carrier wave type dynamic strainmeter with frequency response of 2.5 kHz. One unit is for one measurement channel, and two or more units can be installed in an exclusive case or rack to make a multi-channel system. 
By installing the units in the exclusive carrying case for computer control, control from a PC via LAN is possible such as setting of sensitivity and low pass filter, operation of balancing and calibration, and acquisition of setting and monitor values.

Carrier type Dynamic Strainmeter DA-17A
Features
  • Frequency response of DC to 2.5 kHz
  • Digital monitor of output voltage, with indication of maximum / minimum value and open / over
  • Electronic automatic balancing
  • Isolation between input and output
  • Automatic tracking capacity balancing
  • Peak hold function privided
  • Dual output
  • Built-in low-pass filter
  • Insulation resistance check function for strain gauge bridge
  • External control possible for balancing and calibration signal output
  • Dual power supply of AC and DC
  • Possible control by PC (when installed in exclusive case)
  • Specifications

    Type DA-17A
    Measuring object Strain
    Number of channels 1 channel
    Measuring range

    ±50000 x 10-6 strain

    Frequency response DC to 2.5 kHz
    External dimensions 40(W) x 140(H) x 266(D) mm
    Weight Approx. 870 g
    Power supply AC 90 to 132 V 50 / 60 Hz 7.5 VA MAX. (AC100 V)
    DC 10 to 30 V 0.25 A MAX. (DC12 V)

Carrier type Dynamic Strainmeter DA-37A

The DA-37A is a carrier wave type dynamic strainmeter with high frequency response of 10 kHz. One unit is for one measurement channel, and two or more units can be installed in an exclusive case or rack to make a multi-channel system.
By installing the units in the exclusive carrying case for computer control, control from a PC via LAN is possible such as settings of sensitivity and low pass filter, operation of balancing and calibration, and acquisition of setting and monitor values.

Carrier type Dynamic Strainmeter DA-37A
Features
  • High frequency response of DC to 10 kHz
  • Digital monitor of output voltage, with indication of maximum / minimum value and open / over
  • Electronic automatic balancing
  • Isolation between input and output
  • Automatic tracking capacity balancing
  • Dual output
  • Built-in low-pass filter
  • Insulation resistance check function for strain gauge bridge
  • External control possible for balancing and calibration signal output
  • Dual power supply of AC and DC
  • Possible control by PC (when installed in exclusive case)
  • Specifications

    Type DA-37A
    Measuring object Strain
    Number of channels 1 channel
    Measuring range

    ±50000×10-6 strain

    Frequency response DC to 10 kHz
    External dimensions 40(W) x 140(H) x 266(D) mm
    Weight Approx. 750 g
    Power supply AC 90 to 132 V 50 / 60 Hz 9.2 VA MAX. (AC100 V)
    DC 10 to 30 V 0.35 A MAX. (DC12 V)

Carrier type Dynamic Strainmeter DA-18ACE

The DA-18A is a carrier wave type dynamic strainmeter featuring easy operation and excellent noise resistivity. Digital sensitivity setting method is adopted to enable easy and accurate setting. Also provided is digital display function of measurement value for reliable dynamic measurement. One unit is for one measurement channel, and two or more units can be installed in an exclusive case or rack to make a multi-channel system. 

Carrier type Dynamic Strainmeter DA-18A
Features
  • Frequency response of DC to 2.5 kHz
  • Carrier wave bridge excitation provides excellent resistivity to noise
  • Equipped with two output monitors; Digital display and level meter
  • Lower power consumption compared to conventional models
  • Automatic tracking capacity balancing
  • Reading and automatic setting of TEDS transducer
  • Dual output
  • Built-in low-pass filter
  • External control possible for balancing and calibration signal output
  • Specifications

    Type DA-18A
    Measuring object Strain
    Number of channels 1 channel
    Measuring range

    ±50000×10-6 strain

    Frequency response DC to 2.5 kHz
    External dimensions 40(W) x 140(H) x 266(D) mm
    Weight 870 g
    Power supply AC 90 to 110 V or 198 to 242 V 50 / 60 Hz 6 VA MAX. (AC100 V)
    DC 10 to 30 V 0.25 A MAX. (DC12 V)

Carrier type Dynamic Strainmeter DA-38A

The DA-38A is a carrier wave type dynamic strainmeter with high frequency response of 10 kHz. It features easy operation and excellent noise resistivity. Digital sensitivity setting method is adopted to enable easy and accurate setting. Also provided is digital display function of measurement value for reliable dynamic measurement. One unit is for one measurement channel, and two or more units can be installed in an exclusive case or rack to make a multi-channel system.

Carrier type Dynamic Strainmeter DA-38A
Features
  • Frequency response of DC to10 kHz
  • Carrier wave bridge excitation provides excellent resistivity to noise
  • Always checks disconnection of strain gauges and cable
  • Two output monitors provided; Digital display and level meter
  • Lower power consumption compared to conventional models
  • Automatic tracking capacity balancing
  • Reading and automatic setting of TEDS transducer
  • Dual output
  • Built-in low-pass filter
  • Possible external control for balancing and calibration signal output
  • Specifications

    Type DA-38A
    Measuring object Strain
    Number of channels 1 channel
    Measuring range

    ±50000 x 10-6 strain

    Frequency response DC to 10 kHz
    External dimensions 40(W) x 140(H) x 266(D) mm
    Weight Approx. 750 g
    Power supply AC 90 to 264 V 50 / 60 Hz 8.5 VA MAX. (AC100 V)
    DC 10 to 30 V 0.27 A MAX. (DC12 V)