T-ZACCS +

T-ZACCS+ Alarm Unit AL-360

The alarm output function monitors a specified channel and closes the specified contact when the measured value changes by a certain amount (relative value setting) or exceeds a threshold value (upper and lower limit setting).
Monitoring compares and switches contacts when monitoring or scanning is performed. There are four output contacts, and the comparison channel, comparison conditions, and output destination contact can be set.
It is also possible to set a single contact for multiple channels and close the contact if any of them exceeds the set range.

AL-360

AL-360

Features
  • Any monitoring channel and any output contact (1 to 4) can be set
  • Relative values and upper and lower limit conditions can be set
  • Selectable monitored value from monitor value and scan value

  • Specifications
    Number of contact points 4
    Contact point Semiconductor relay (a-contact: normally open)
    Contact capacity
    140V AC / 200V DC MAX
    Rated current 0.6A MAX
    Inrush current 1.8A MAX
    ON resistance 2Ω MAX
    Display Status LED
    Lights up when each contact is closed
    Comparison method Relative value, upper/lower bounds
    Number of setting tables 1000
    Other Function Alarm test
    Power Supplied via TS-360
    Operating temperature and humidity range -10 to +50°C
    85%RH or less (excluding condensation)
    External dimensions 280(W)×45(H)×60(D)mm
    (excluding rubber protectors and protrusions)
    Weight Approx. 600g

More Information

Product