Multi-Recorder Control Unit(TMR-300 Series)

Control unit TMR-311 CE

This works as the central unit of multi-recorder system. It controls, supplies power to and collects data from the connected measurement units. Up to ten measurement units can be controlled for measurement of 80 points at maximum. 

Control unit TMR-311

  • Specifications
    Type TMR-311
    Number of measuring　points 80 at maximum
    (with up to 10 networked units, by selection of input unit)
    Sampling 0.01 to 0.09ms (set by every 0.01ms)
    0.1 to 0.9ms (set by every 0.1ms)
    1 to 1000ms (set by every 1ms)
    512, 1024, 2048, 4096, 8192 Hz
    Trigger function Data trigger Data of optional channel
    (optional input level, or relative level from start)
    Command trigger Command from interface
    Timer trigger Real time, Interval
    Synchronization of multiple units Synchronization of sampling and trigger for up to 4 units of TMR-311 (320 measurement points)
    Maximum extension between two units: 100m
    Recording media SD card 4GB to 32GB (SDHC high speed mode class 10)
    Interface LAN, USB, Wireless LAN (AP mode, IP fixed) *
    *: Built-in wireless LAN is not available for overseas model.
    Indication Status LED (status, IP address, etc.)
    External dimensions 200(W) x 50(H) x 100(D) mm (excluding projected parts)
    Weight Approx. 900g (including rubber protectors)
    Power supply DC 10 to 30V, 0.6A at maximum (when 12V supplied, single unit)
    AC 100 to 240V, 50/60 Hz, 100VA at maximum (when using optional AC adapter CR-1897)

Part Names

Front

TMR-311-Front-side

 

Back

TMR-311-Rear-side

Frequency processing library TMR-311-01 (optional)

This is an optional frequency processing library for the TMR-300 series of multi-recorders. 
It realizes a histogram recording system that digitally processes measurement data according to a preset program and records them as frequency counts. 
Six frequency analysis methods are available: maximum and minimum value method (PEAK/VALLEY), maximum and minimum value method (MAX/MIN), amplitude method (AMP), time method (TIME), level crossing method (LEVEL), and rain flow method (RAIN). 

Features

  • Up to 80 analyses can be performed in low-speed mode with a sampling interval of 1 ms or more
  • Multiple analysis methods can be set up for the same channel

Note

Frequency measurement requires the optional frequency processing library. 
Purchase of the library and opening of its functions are required to use the library. 

More Information

Product