High Response Acceleration Transducer

ARJ-A High response Acceleration Transducer 50 to 2000m/s2

The ARJ-A acceleration transducer is small in size and has highly responsive characteristics. It is developed to measure the acceleration of machines, vehicles, ships, civil engineering structures, buildings, and so forth.

Protection ratings : IP 61 equivalent

ARJ-A High response Acceleration Transducer
Features
  • Compact
  • Easy handling

  • Specifications
    Type Capacity Rated output Non-linearity Temperature range
    ARJ-50A 50 m/s2 Approx. 0.5 mV/V
    (1000x10-6 strain)    		 1 %RO -10 to +60 ℃
    ARJ-100A 100 m/s2 -10 to +50 ℃
    ARJ-200A 200 m/s2
    ARJ-500A 500 m/s2
    ARJ-1000A 1000 m/s2
    ARJ-2000A 2000 m/s2

    Output polarity

    Measurement moves in the plus direction when acceleration occurs in the acceleration transducer itself toward the “+” mark on the casing.

More Information

ARJ-A-D High response Bi-axial Acceleration Transducer 50 to 2000 m/s2 (made-to-order)

This acceleration transducer was developed for measurement of acceleration in the machinery, automobile, ship, civil engineering/architecture, and other fields. It is designed to be small and lightweight so that installation does not disturb the vibration mode of the object being measured.

Protection ratings : IP 61 equivalent

ARJ-A-D High response Bi-axial Acceleration Transducer
Features
  • Compact
  • Easy handling
  • Bi-axial measurement with the same size as ARJ-A uni-axial model

  • Specifications
    Type Capacity Rated output Non-linearity Temperature range
    ARJ-50A-D 50 m/s2 Approx. 0.5 mV/V
    (1000x10-6 strain)    		 1 %RO -10 to +60 ℃
    ARJ-100A-D 100 m/s2 -10 to +50 ℃
    ARJ-200A-D 200 m/s2
    ARJ-500A-D 500 m/s2
    ARJ-1000A-D 1000 m/s2
    ARJ-2000A-D 2000 m/s2

    Output polarity

    Measurement moves in the plus direction when acceleration occurs in the acceleration transducer itself toward the “+” mark on the casing.

More Information

ARJ-A-T High response Tri-axial Acceleration Transducer 50 to 2000 m/s2

The ARJ-A-T acceleration transducer was developed to measure the acceleration of machines, vehicles, ships, civil engineering structures, buildings, and so forth. It is designed as a small and lightweight transducer so that it can be installed without disturbing the vibration mode of the object to be measured.

Protection ratings : IP 61 equivalent

ARJ-A-T High response Tri-axial Acceleration Transducer
Features
  • Compact
  • Easy handling
  • Compared to conventional models, achieves 1/3 the weight and 1/8 the volume

  • Specifications
    Type Capacity Rated output Non-linearity Temperature range
    ARJ-50A-T 50 m/s2 Approx. 0.5 mV/V
    (1000x10-6 strain)    		 1 %RO -10 to +60 ℃
    ARJ-100A-T 100 m/s2 -10 to +50 ℃
    ARJ-200A-T 200 m/s2
    ARJ-500A-T 500 m/s2
    ARJ-1000A-T 1000 m/s2
    ARJ-2000A-T 2000 m/s2

    Output polarity

    Measurement moves in the plus direction when acceleration occurs in the acceleration transducer itself toward the “+” mark on the casing.

More Information

Small High-response High-capacity Single-axis Acceleration Transducer ARGH-A　500m/s2 to 2000m/s2

The ARGH-A is a small and high-response acceleration transducer incorporating a MEMS-based acceleration sensor. Its small, light-weight and robust structure allows the use of this transducer for the measurement in various fields such as machines, vehicles, ships, civil engineering and construction. This transducer can easily be used by merely connecting it to our dc-exciting dynamic strain meter without using an external power supply.

Protection ratings : IP 61 equivalent

ARGH-A
Features
  • Small and light-weight
  • Wide frequency response range
  • Dedicated to single-axis measurement
  • Allowable overload is larger than that of strain gauge type acceleration transducer
  • Measurement possible from DC level
  • No need of external power supply; Measured just being connected to an instrument
  • Output level equal to a strain gauge type acceleration transducer obtained by the built-in amplifier

 

  • Specifications
    Type Capacity Rated output Non-linearity Allowable temperature range
    ARGH-500A 500m/s2 Equivalent to 1800×10-6 strain ±10% 2％RO -10 ~ +60°C
    ARGH-1000A 1000m/s2
    ARGH-2000A 2000m/s2

    Output polarity

    Measurement moves in the plus direction when acceleration occurs in the acceleration transducer itself toward the “+” mark on the casing.

More Information

Small High-response Low-capacity Single-axis Acceleration Transducer ARGL-A  20 to 200m/s2

The ARGL-A is a small and high-response acceleration transducer incorporating a MEMS-based acceleration sensor. Its small, light-weight and robust structure allows the use of this transducer for the measurement in various fields such as machines, vehicles, ships, civil engineering and construction. This transducer can easily be used by merely connecting it to our dc-exciting dynamic strain meter without using an external power supply.

Equivalent to IP61

ARGL-A
Features
  • Small and light-weight
  • Wide frequency response range
  • Dedicated to single-axis measurement
  • Allowable overload is larger than that of strain gauge type acceleration transducer
  • Measurement possible from DC level
  • No need of external power supply; Measured just being connected to an instrument
  • Output level equal to a strain gauge type acceleration transducer obtained by the built-in amplifier

  • Specifications
    Type Capacity Rated output Non-linearity Allowable temperature range
    ARGL-20A 20m/s2 Equivalent to 800×10-6 strain ±15% 2％RO -10 ~ +60°C
    ARGL-40A 40m/s2
    ARGL-100A 100m/s2
    ARGL-200A 200m/s2

    Output polarity

    Measurement moves in the plus direction when acceleration occurs in the acceleration transducer itself toward the “+” mark on the casing.

More Information

Small High-response Low-capacity Tri-axial Acceleration Transducer ARGL-A-T　20m/s2 to 200m/s2

The ARGL-A-T is a small and high-response acceleration transducer incorporating a MEMS-based acceleration sensor. Its small, light-weight and robust structure allows the use of this transducer for the measurement in various fields such as machines, vehicles, ships, civil engineering and construction. This transducer can be just connected to our dc-exciting dynamic strain meter and measured without the need of an external power supply.

Protection ratings : IP 61 equivalent

ARGL-A-T
Features
  • Small and light-weight
  • Measurement in 3-directions possible with the same size as a uni-axial model
  • Excellent temperature characteristics and frequency response
  • Wide frequency response range
  • Outputs of 3-directions are measured by one input/output cable
  • Robustness with allowable overload larger than that of a strain gauge type acceleration transducer
  • Measurement possible from DC level
  • Output level equal to a strain gauge type acceleration transducer is obtained by the built-in amplifier
  • Sensitivity loss is not caused by an extension cable

  • Specifications
    Type Capacity Rated output Non-linearity Allowable temperature range
    ARGL-20A-T 20m/s2 Equivalent to 800×10-6 strain ±15% 2％RO -10 ~ +60°C
    ARGL-40A-T 40m/s2
    ARGL-100A-T 100m/s2
    ARGL-200A-T 200m/s2

    Output polarity

    Measurement moves in the plus direction when acceleration occurs in the acceleration transducer itself toward the “+” mark on the casing.

More Information

Small High-response Low-capacity Tri-axial Acceleration Transducer ARGH-A-T   500m/s2 to 1000m/s2

The ARGH-A-T is a small and high-response acceleration transducer incorporating a MEMS-based acceleration sensor. Its small, light-weight and robust structure allows the use of this transducer for the measurement in various fields such as machines, vehicles, ships, civil engineering and construction. This transducer can easily be used by merely connecting it to our dc-exciting dynamic strain meter without using an external power supply.


Protection ratings: IP61 equivalent

ARGH-A-T
Features
  • Small and light-weight
  • Measurement in 3-directions possible
  • Excellent temperature characteristics and frequency response
  • Wide frequency response range
  • Robustness with allowable overload larger than that of a strain gauge type acceleration transducer
  • Measurement possible from DC level
  • Output level equal to a strain gauge type acceleration transducer is obtained by the built-in amplifier
  • Sensitivity loss is not caused by an extension cable

  • Specifications
    Type Capacity Rated output Non-linearity Allowable temperature range
    ARGH-500A-T 500m/s2 Equivalent to 1800×10-6 strain ±10% 2％RO -10 ~ +60°C
    ARGH-1000A-T 1000m/s2

    Output polarity

    Measurement moves in the plus direction when acceleration occurs in the acceleration transducer itself toward the “+” mark on the casing.

More Information

Product