T-ZACCS3 Pocket Load Meter MM-014L

Peak value of instantaneously changing load is securely detected
The MM-014L is a hand-held instrument used in combination with a strain gauge type transducer such as load cell or displacement transducer for direct reading of physical quantities. It is small, light-weight and easy-to-carry. The measurement is possible by only setting the capacity and rated output of the connected transducer. Its peak hold function enables display and recording of peak value in addition to ordinary measured value. The measured values are stored in the internal data memory and a SD card, which allows easy and smooth data acquisition. The display is clearly visible even outdoors owing to the use of reflective color LCD. Intuitive operation is possible using the function keys which are linked with icons in the screen.

• Specifications

  Type		MM-014L
  Number of measuring point		1 point
  Bridge excitation		Constant voltage method: DC 2V Constant current method: 5.7 mA (2V at 350Ω bridge)
  Applicable transducer		Strain gauge type transducer (full bridge)
  Applicable gauge resistance		Constant voltage method: 120 ~ 1000 Ω Constant current method: 350Ω
  Cable extension distance for constant current mode		Total resistance of cable 45 Ω or less
  Measuring range		±30,000×10-6strain
  Resolution		1×10-6strain
  Initial value memory range		±16,000×10-6strain
  Peak hold item		+ peak value, - peak value
  Peak hold method		Analog detection, Digital hold
  Peak hold accuracy		DC ~ 100Hz: ± 1%FS 100 ~ 200Hz: ± 3%FS 200 ~ 300Hz: ± 5%FS (when low pass filter is PASS)
  Low pass filter		30, 100, 300 Hz and PASS  -3dB±1dB
  Measurement mode		Initial, Direct, Measure
  Program setting		Coefficient, Unit, Decimal point, Offset
  Coefficient setting		Sensor ID, TEDS, Coefficient input
  Interval timer		Measurement at set intervals
  Zero tracking		If the change of measured value remains within the set value in the set time, the current measured value is regarded as zero.  This process is repeated.     Set value: 1 ~ 10 digits in increments of 1 digit     Set time: 10 ~ 60 seconds in increments of 10 seconds
  Auto power OFF		Automatically turns off the power if neither key operation nor command through interface is accepted for the specified time (ON/OFF setting of auto power-OFF function possible)
  Display		2.7 inch TFT color liquid crystal display
  Resolution		400 × 240 dot
  Operation		Function key 1/2/3, UP/DOWN key, ENTRY key, POWER key
  Internal memory	Function	Measured data recording, Setting file recording/reading
  	Capacity	6000 data at maximum
  	Recording method	Interval timer, ENTRY key (manual)
  SD card	Function	Measured data recording, Setting file recording/reading
  	Physical format	FAT16/32
  	Recording format	CSV format
  	Capacity	512 Mbyte (specified by our company)
  Interface		Conforms to RS-232C (various settings, measurement, data acquisition)
  Built-in battery		Lithium-ion battery (1900 mAh)
  Continuous operating time		Approx. 6 hours (Condition  Temperature: 23°C±5°C Measurement: Monitoring (350Ω bridge) )
  Charging time		Approx. 3 hours
  External power supply		Exclusive USB AC adaptor (Type C)  AC 100 ~ 240 V  50/60 Hz
  Operating environment		0 ~ +50°C  85%RH or less (no condensation)
  Charging environment		0 ~ +40°C  85%RH or less (no condensation)
  External dimensions		136(W) × 32(H) × 71(D) mm
  Weight		Approx. 300 g

• External Dimensions