T-ZACCS UNIT
Channel Unit AU-10/AU-10-05
To add measuring channels to the TS-360 portable data logger, connect the AU-10/AU-10-05 channel unit!
Unit to add 10 measuring points. Set the unit number using the digital switch and assign a channel number to each measuring point of the unit. The channel unit is connected to the driver unit AU-50MA or the master unit AU-50M.
During measurement, the LED corresponding to the measurement channel lights up and the LED emission colour varies depending on the sensor mode type (LED emission colour Strain measurement: red, DC voltage measurement: blue, thermocouple temperature measurement: green).
Without connector: AU-10 With connector: AU-10-05
- Features
- Up to 5 additional units can be added against the T-ZACCS+ master unit
- When used as a switching box, it can be used with conventional data loggers such as TDS-540 and can be mixed with conventional switch boxes ASW-50C/SSW-50D
- Up to 5 additional units for T-ZACCS+ driver units or master units
-
Specifications
Type T-ZACCS UNIT
Channel Unit AU-10/AU-10-05Number of measurement points 10 points Input terminal Dual-use screw-mounted and soldered type One-touch connector NDIS One-touch connector (AU-10-05 only) Power supply Supplied by AU-50MA/AU-50M Dimensions AU-10：280（W）×45（H）×60（D）mm
AU-10-05：280（W）×45（H）×80（D）mm
*Excluding rubber protector and protruding partsWeight AU-10: approx. 900 g
AU-10-05: approx. 1.2 kg
More Information
