PC-connected Measuring Instruments

USB Strain Converter DSCUSB

The DSCUSB is an on-line measuring instrument that connects to a PC via a USB interface. A sensor input conversion cable is included, allowing direct connection of strain-gauge transducers.
Compact and power supply-free. Measurements can be made easily and reports can be generated immediately. 
This product is imported from Mantracourt Electronics Limited, UK.

USB Strain Converter DSCUSB
Features
  • Pocket-sized, weighing only 45 grams
  • No power supply required (using USB bus power)
  • Data is recorded in CSV format. Data can be organised using familiar spreadsheet software.
  • Measurement with multiple units possible (using a USB hub).
  • Conversion cable with NDIS connector included
  • Specifications

    Type DSCUSB
    measurement object Strain gauge transducers (4-gauge 80 to 5000 Ω)
    Number of measuring point 1(Can be used with multiple units)
    bridge power supply DC5V
    Measuring range ±3mV/V (±6000×10-6strain)
    A/D conversion 24bit
    Sampling frequency 1, 2, 5, 10, 20, 50, 60, 100, 200 Hz
    Recording interval Can be set arbitrarily between 10ms and 32s
    Filter Recursive filters (IIR) Programmable
    Interface USB
    OS Windows 7/8/8.1/10
    Operating temperature and humidity range -40 to +85℃ 95%RH or less (excluding condensation)
    External dimensions 71(W)×20(H)×51(D) (Excluding connectors)
    Weight 45g(Main unit only)
    Power Supplied from USB bus power

Please download the standard software “DSCUSB Toolkit” from the link below.